Best Plumbers in Sydney
APT Plumbing

Five Most Common Plumbing Issues & How to Fix Them

By APT Plumbing Admin on 10 May 2023

Plumbing problems can be frustrating and can be disruptive to daily life. From leaky faucets to clogged drains, these issues can cause damage to your home and even affect your health. Fortunately, many common plumbing problems are easy to fix, with some basic knowledge and a few simple tools. Here are the five common plumbing issues and how you can fix them:

Dripping Faucets

A dripping faucet is one of the most common plumbing problems, and it can waste a lot of water and increase your utility bills. The most likely cause of a dripping faucet is a worn-out washer or O-ring. These parts can become worn over time due to use or sediment build-up in the faucet. To fix a dripping faucet, start by turning off the water supply to the faucet. Next, remove the handle and unscrew the packing nut with pliers. You should then be able to remove the stem and access the washer or O-ring. The worn part should be replaced with a new one, and then reassemble the faucet.

Clogged Drains

A clogged drain can be caused by a variety of things, including hair, food particles, and grease build-up. One common cause of a clogged drain is pouring grease down the drain, which can solidify and create a blockage. To fix a clogged drain, start by removing any visible debris from the drain opening. Next, try using a plunger to remove the blockage. If the clog is still there, you can try using a drain snake or auger to break up the clog. If none of these methods work, you may need to call a plumber to use more advanced tools to remove the blockage.

Running Toilets

A running toilet can waste significant water and increase your utility bills. A faulty flapper valve is one of the most common cause of a running toilet. This valve controls the flow of water from the tank to the bowl, and if it’s not functioning properly, water will continue to flow into the bowl. To fix a running toilet, first thing to do is turn off the water supply to the toilet. Next, remove the tank lid and flush the toilet. You should see the flapper valve rise and fall. If it doesn’t, or if it’s not sealing properly, it needs to be replaced. Install a new flapper valve and test the toilet to make sure it’s functioning properly.

Low Water Pressure

Low water pressure can be caused by a variety of factors, including a build-up of sediment in pipes, a leak, or a faulty pressure regulator. To fix low water pressure, start by checking your water pressure with a pressure gauge. If the pressure is lower than normal, you may need to clean or replace your aerators or showerheads. If that doesn’t work, you may need to check for leaks in your pipes or replace your pressure regulator.

Leaking Pipes

Leaking pipes can cause significant damage to your home and increase your utility bills. The most common causes of leaking pipes are age and corrosion. To fix a leaking pipe, start by turning off the water supply to the affected area. Next, use a pipe cutter or hacksaw to remove the damaged section of the pipe. Install a new section of pipe and reassemble the plumbing connections. You may also want to use a pipe sealant to ensure a watertight connection.

In conclusion, these are five of the most common plumbing issues and how to fix them. While some plumbing problems can be more complex and require the help of a professional plumber, many can be fixed with some basic knowledge and a few simple tools. By learning how to fix these common plumbing issues, you can save money on utility bills and prevent damage to your home.

When it comes to plumbing problems, it’s always tempting to try and fix them yourself. After all, with the help of a few online tutorials or a DIY book, how hard can it be? However, it’s important to remember that plumbing is a skilled trade, and trying to tackle a problem without the proper knowledge and tools can lead to bigger issues down the line. That’s why it’s essential to choose a professional plumber for your plumbing needs. Here are some reasons why:

If you require the services of a professional plumber, APT Plumbing Services is your best choice. They have fully equipped vans and are available 24 hours a day.

Why choose APT Plumbing? They are a local business in Sydney and have more than 50 years of experience in the plumbing industry. They offer discounts and transparent pricing policy that allows you to know the exact cost before they start work. The best thing about them is that their team of professional plumbers is on-time and situated in multiple locations around Sydney, allowing them to get dispatched to the nearest customer.

The APT Plumbing team is dedicated, professional, and courteous. They listen to their clients needs and wants and guarantee to get the job done within the time frame given.